1. In order to prevent the plastic track from getting wet, it is necessary to do a good job in waterproofing. There are certain conditions during the construction of the plastic runway project. If the surface temperature during construction should be in the range of 15 ~ 45 degrees, the weather should be sunny, no fog, and the relative humidity should be low. In order to ensure the quality of the entire plastic runway project, the construction personnel should follow these conditions during the construction process, so as not to achieve the desired effect of construction.
2. The plastic runway project should prevent water accumulation as much as possible during the construction process, because the plastic runway is a polyurethane plastic material. After the plastic runway rubber surface is laid, the phenomenon of local blistering will occur.Because the control of the compactness of the base of the plastic runway is unreasonable, we need to strictly control the compactness of the plastic runway to prevent the unrealistic impact of the asphalt base embedding and the separation Layer phenomenon, the appearance of plastic runway gasification, and even the primer is pulled in severe cases.
3. Therefore, during the construction process of the construction of the plastic runway, the construction personnel must do a good job of waterproofing. During the construction period, they should be equipped with plastic cloths. They should listen to the weather forecast at any time. Once the rubber runway enters water during initial maintenance, air bubbles will be generated, which will affect the laying quality of the plastic runway. In addition to protecting against rain, the sweat of construction workers can also affect the solidification of runway plastic glue.
4. When laying the plastic track construction personnel under high temperature environment, they should prepare towels beforehand. Paving time should be avoided in the morning when the air and floor humidity is too high. During the construction process, the construction personnel shall arrange all procedures strictly and reasonably to ensure the reliable quality of the project.